New expanded “Return to Resident Round QSO Room” function

The timer to limit for the stations to stay in the QSO Room has been added.You are now able to set your designated desirable time for up to three/3 independent stations to connect to the room automatically.
(NB: In order to make this function available, you need to turn off the Resident Function to the designation station.Property-> General Settings-> TOT)

New Group Window Display
The detail contents of The Group Window Display are now expanded to 3/three screens, and you can now choose and select your preference.
“SRG/FEG/Bookmark List”
You may choose this screen to display the Node/Room stations designated by “Group Settings” as previously.
“Connecting Node List” (New)
To display all the node stations currently connecting to the QSO Room you are connecting now.

“My Room Access List”
(New, only when you are operating your Round QSO Room at your node)
To display all the node stations currently connecting to your QSO Room.
* You are able to see all these list with your preference by QTH, ID#, Call sign, etc. to sort ascending/descending in alphabetical order.

Additional Display of the TOT Counter
Your remained available transmission time will be displayed (counting down from three/3 minutes).

Changes and additional functions of the Audio Settings function

(a)Sound Device Selection (New.FileAudio Settings)
Even when you have several Sound Devices (Drivers), you may able to choose your most desirable one
.

(b) Change in the “Other” setting/configuration of the Voice in Select function
Deleted to select fromMIC/LINE/Other.On/Off configuration for “Other”

Other = OFF : Audio only comes in from the device (driver) you selected with the Sound Device selection (disregarding and overriding your original selection of your Operating System).
Only MIC or LINE-IN can be selected as your “Voice In Select”.

Other = ON : Audio only comes from the device (driver) that you selected with the Sound Device selection.
Both of your audio “In and Out” will not be controlled and configured

(c) Changes in configuringyour audio related settings/parameters
When you are connected, you are not able to change/configure your Voice In Select/Sound Device parameters.You will be required to restart your WiRES-II program.The details (of your new arrangement) will be recorded in your log.

(d) Deleted “Other = ON” display (at the right end corner of the display).
To be displayed as “Other (IN)”.
Initialization to the Default Function
(a)New additional function to return back and to initialize to the default conditions.
(b)Reset Function of your Wires-II activation with the WiRES-II Server
(You have now no need to configure to re-set up your program when you change your registered information.)

Display of the Parameters of CW/Voice on the Property Sheet

<Other changes and revisions>

COM PORT : Now expanded up to 256.
Limitation of frequency input format
Currently limited up to 13000MHz -> Now up to 999999.99MHz (nine(9) digits with four (4) decimals
QSL pictures to be shown for the own node/Room at the Get Info display
IN/OUT Announcement Updated for making proper announcement when configured ID timing=”Wait”/ID and TX mode only=”Only not connected”.
Remote Operation
Updated for making proper behavior for the exit operation of the remote function when the Personal Settings/Round QSO Room Setting displays are on.
（Important note for all Round QSO Room owners）
Please make your allowable stations that can check-in your QSO room as minimum as necessary.You may need more RAM memories, faster processor PCs, and/or faster broadband internet traffic connection environment, etc.)